IMcIntensityCalib Properties |
|
The IMcIntensityCalib type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | ChangeCount | A count of changes to image properties. |
| FittingMode | Get the method used to fit the calibration response LUT to the
sampling points (mcitFreeForm mode only) |
| Flags | Gets or sets the intensity calibration status flags. |
| InputMax | Get the upper bound of the calibration mapping. |
| InputMin | Get the lower bound of the calibration mapping. |
| IsInUse | This property indicates whether the calibration is in use on an open image. |
| Lut | Get the calibration response LUT |
| LutCount | Get the number of entries in the calibration LUT |
| LutMax | Get the maximum calibrated value found in the calibration
response LUT. |
| LutMin | Get the minimum calibrated value found in the calibration
response LUT. |
| LutMonotonic | Get the Monotinic flag |
| LutPositive | Get the Positive LUT flag |
| Modified | This property indicates whether the calibration has been modified
and should be saved. |
| Name | Get the calibration name. |
| ODBlackLevel | Get the Black Level used to calculate an optical density (mcitOD) calibration. |
| ODIncidentLevel | Get the incident level used to calculate an optical density calibration (mcidOD) |
| SamplePointsCount | Get the number of sample calibration points used to define
a mcitFreeForm calibration |
| Type | Get the type of intensity calibration used. |
| UnitAbbrev | Gets or sets the abbreviation for the intensity calibration unit. |
| UnitName | The calibration unit name. |
See Also