IMcTrackOptions Properties

Maximum change in velocity of object between the frames, the value is in calibrated units.

Allow phantom objects in tracks.

The option can be activated to include merged objects in several tracks. When the option is off, every object of the image will belong to a single track.

Maximum angle deviation of coherent vectors.

If Auto option is ON, the acceleration limit is taken as a half of the velocity limit.

Apply coherent filtering after track detection. The filter discards those velocity vectors whose orientation is incompatible with the dominant orientation of the surrounding vectors.

Size of coherence filter in percents of image size.

Correlation threshold. Range from 0 to 1. If the correlation coefficient is lower than the threshold the track stops.

Use previous frame as reference for correlation tracking, if FALSE, the first frame is used as reference.

Custom interval between frames in seconds. Used only when UseCustomInterval is TRUE.

Track label type.

Minimum total track length in calibrated units. Tracks shorter than this value will be ignored.

The tracks that shorter than the Minimum track length are ignored with automatic and semi-automatic tracking. The value is used only when PartialTracks is TRUE.

Dominant type of objects' movement. Chaotic - no directional movement of the objects. Directional - object movement is predominantly directional, but not always straight. Straight - object moves following straight monotonous trajectory.

Normalize measurements by maximum value in the track.

Number of start points for semi-automatic tracking.

The maximum number of objects per frame to use parallel tracking.

Track length can be less than the number of active frames in the sequence.

Set/get default track name prefix

Defines what outlines will be shown after segmentation as a visual confirmation of object detection.

Maximum distance between expected and real object positions on the neighboring frames in calibrated units.

Show object outlines on active frame

Show complete or partial tracks on the image.

Smoothing degree of track coordinates. Running average filter.

Length of the displayed part of the track in front of active frame.

Number of analyzed frames to find the next point on track.

Track only one biggest object.

Length of the displayed part of the track after the active frame.

Use center of mass calculating object coordinates. When the option is FALSE - geometrical center is used.

Use custom interval between frames, when FALSE time frame property is used.

Use phase correlation for correlation tracking. When FALSE, full correlation is used. Default is FALSE.