IMcLineProfiles Properties

A read-write property specifying whether the ProfileValues are intensity calibrated or not.

A read-write property specifying whether the length properties and sample spacing are spatially calibrated or not.

A read-only property giving the count of line profiles available in the ProfileValues property.

A read-write property specifying which image frame the ProfileValues should be taken from.

A read-write property specifying how the image data should be interpreted.

A read-only property specifying whether the ProfileValues need to be recomputed.

A read-only property giving the length of the last sample section for each line profile.

A read-write property giving the length of each sample when the SampleMode is mclpsmFixedSampleLength.

A read-only property giving the number of channels based on the Interpretation property for the ancestor image.

A read-only property giving the number of sample sections each line profile is to be broken into.

A read-write property giving the number of sample sections each line is to be broken into when the SampleMode is mclpsmFixedNumberOfSamples.

The sampled line intensity profiles from the ancestor McLines or McRegions features.

A read-write property specifying whether lines are sampled at equal intervals or are broken into a given number of sections.

A McLines holding lines with vertices that mark the sampled segments of the ancestor McLines or McRegions features.

A read-write property specifying the width, in pixels, over which ProfileValues samples should be averaged.