LookupTableCommands Properties |
|
The LookupTableCommands type exposes the following members.
Properties| Name | Description | |
|---|---|---|
  | AdvancedDisplay |
Toggles Advanced Display panel.
|
| Apply |
Applies display changes (Brightness, Contrast, Gamma, BW Levels and LUT) to the image.
|
| BestFit |
Sets BW Levels to their best-fit values that exclude selected % of pixels at either end.
|
| BlackLevel |
Sets White Level of the image.
|
| Brightness |
Sets the brightness value associated with the LUT. Values range from 0 to 100. Default (neutral) value is 50.
|
| Contrast |
Sets the contrast value associated with the LUT. Values range from 0 to 100. Default (neutral) value is 50.
|
| Gamma |
Sets the gamma value associated with the LUT. Values range from 0.1 to 10.0. Default (neutral) value is 1.0.
|
| Invert |
Inverts LUT.
|
| Load |
Loads display parameters (LUTs) from the file.
|
| Reset |
Resets display (Brightnes, Contrast, Gamma, BW Levels and LUTs) to default.
|
| Save |
Saves display parameters (LUTs) into the file.
|
| WhiteLevel |
Sets White Level of the image.
|
See Also